Fire doors are one of the most important — and most frequently compromised — elements of a building's passive fire protection. A correctly installed and maintained fire door can hold back fire and smoke for a critical period, protecting escape routes and giving occupants time to get out safely. A poorly maintained one can fail in seconds.

If you're a landlord, managing agent, or the person responsible for fire safety under your local fire safety legislation, understanding what a proper fire door inspection involves — and how often it needs to happen — is essential.

Why fire door inspections matter

A fire door is a certified fire-resisting assembly: the leaf, frame, seals, hinges, glazing and hardware all need to be the correct, matched components for the door to perform as tested. Change one part — swap a hinge, remove a seal, drill a hole for new cabling — and the whole assembly's fire performance can be compromised, even though the door still looks fine.

In practice, the most common problems aren't dramatic. They're small, everyday issues that build up over time:

How often should fire doors be inspected?

Guidance commonly recommends that fire doors in communal areas of higher-risk residential buildings are checked quarterly, with a more detailed inspection at least annually. Fire doors in other commercial and residential settings should, as a minimum, be included in regular routine checks and a periodic formal inspection — the right frequency depends on your building's use, occupancy and risk profile.

The safest approach is to treat fire door inspection as an ongoing programme, not a one-off box-ticking exercise.

What a proper inspection covers

A thorough fire door inspection goes well beyond "does it close." Each door should be checked and recorded individually, covering:

What to do with the results

A good inspection report doesn't just list defects — it prioritises them. A missing seal on a door to a high-risk escape stair needs attention faster than cosmetic wear on a low-traffic cupboard door. Reports should give you a clear, door-by-door record you can act on, and that you can produce as evidence of due diligence if ever required.

How FRAC can help

Our fire door inspections give you a complete, photographed record of every fire door on your premises, rated by condition and risk, with practical recommendations for remediation. We're independent — we're not selling doors, seals or installation work, so our findings are about what's actually needed, not what's profitable to fix.

Book a Fire Door Inspection