Compartmentation is the strategy of dividing a building into fire-resisting sections, so that a fire starting in one area is contained and slowed, protecting escape routes and giving firefighters a better chance of controlling it. It's one of the most effective fire safety measures a building has — and one of the easiest to accidentally undo.
The problem: invisible damage
Unlike a missing fire extinguisher or a propped-open fire door, a breach in compartmentation is often completely invisible. A wall or floor can look perfectly intact while a gap around a cable or pipe passing through it leaves a direct path for fire and smoke to spread into the next compartment.
These breaches almost never happen through deliberate neglect. They happen through ordinary building life:
- New data or electrical cabling run through a wall or floor without re-sealing the penetration
- Pipework altered or extended during a plumbing or HVAC upgrade
- Service risers accessed for maintenance and not properly closed up afterwards
- Fire-rated ductwork or dampers removed or bypassed during refurbishment
- Original fire-stopping materials degrading or being damaged over time
Why this matters more than people think
A single unsealed penetration might seem minor, but fire and smoke will take the path of least resistance. In a real fire, even a small gap can allow smoke to spread far faster than through structure alone, compromising escape routes well before the fire itself reaches them.
Compartmentation is only as strong as its weakest penetration — and most buildings accumulate dozens of them over time without anyone noticing.
What a fire stopping survey actually checks
A proper survey works systematically through the building's fire-resisting elements:
- Compartment walls and floors, checking for unsealed penetrations
- Service risers, voids and ceiling voids where cabling and pipework typically run
- The condition of existing fire-stopping materials — intumescent sealants, mastics, collars and wraps
- Fire-rated ductwork and fire dampers, confirming they're present and functioning where specified
- Any visible signs of unauthorised alteration since original construction or last survey
Acting on the findings
Not every defect carries the same risk. A survey should prioritise findings by location and severity — a breach in a wall separating a plant room from an escape stair is a different order of urgency to a minor gap in a low-risk storage area. A good report gives you a clear, mapped record of what to fix first.
How FRAC can help
Our fire stopping inspections combine a methodical physical survey with clear, location-referenced photographic reporting, so you know exactly where the issues are and how urgently each one needs addressing.